CSIT/fdio csit lab ext lld draft

From fd.io
< CSIT
Revision as of 22:33, 13 June 2018 by Mackonstan (Talk | contribs)

Jump to: navigation, search

FD.io CSIT Lab Extension - LLD Draft

This is a (proposed) low-level design for the extensions of FD.io CSIT lab to accommodate the new Intel Xeon Skylake, Arm AArch64 and Atom devices. The current version is available on CSIT wiki.

Testbeds Overview

Testbeds Type Breakdown

 #.  CSIT_tb.           Purpose.    SUT.  TG.   #tb.  #SUTs.  #TGs. #skx_node.
 1.  1-node Xeon.       func.       skx.  n/a.  2.    2.      0.    2.
 2.  2-node Xeon.       perf.       skx.  skx.  4.    4.      4.    8.
 3.  3-node Xeon.       perf.       skx.  skx.  2.    4.      2.    6.
 4.  tcp-l47.           tcp-stack.  skx.  ps1.  1.    1.      1.    1.
 5.  atom-netgate.      perf+func.  net.  skx.  1.    3.      1.    1.
 6.  aarch64.           perf+func.  arm.  skx.  >1.   >1.     2.    2.
                                                 Total skx_node:   20.

1-Node Xeon Testbeds

One 1-node Xeon testbed for VPP_Device tests is built using one SUT (Type-6 server), with NIC ports connected back-to-back.

2-Node Xeon Testbeds

Four 2-node Xeon testbeds (are expected to be built|are built), with each testbed using one SUTs (Type-1 server) and one TG (Type-2 server) connected back-to-back. NIC cards placement into slots and NIC ports connectivity is following the testbed specification included in next sections.

3-Node Xeon Testbeds

Two 3-node Xeon testbeds (are expected to be built|are built), with each testbed using two SUTs (Type-1 server) and one TG (Type-2 server) connected in full-mesh triangle. NIC cards placement into slots and NIC ports connectivity is following the testbed specification included in next sections.

Arm Testbeds

One 3-node Huawei testbeds (are expected to be built|are built), with each testbed using two SUTs (Type-3 server) and one TG (Type-2 server) connected in full-mesh triangle.

One 3-node Marvell testbeds (are expected to be built|are built), with each testbed using two SUTs (Type-4 server) and one TG (Type-2 server) connected in full-mesh triangle.

TCP/IP and L47 Testbeds

One 2-node Ixia PS One and Xeon server testbed, for TCP/IP host stack tests.

Atom Testbeds

One 3-node Atom (Netgate based) testbed is built consisting of three SUTs (Type-5 Netgate device.) NIC cards placement into slots and NIC ports connectivity is following the testbed specification included in the next section.

Inventory

Appliances

1. Ixia PerfectStorm One Appliance
    - 1 * PS10GE4NG
        - Chassis: PS10GE4NG.
        - Motherboard: SuperMicro X11DPG-QT.
        - Processors: Quad-Core, Intel Processor.
        - HW accelerators: FPGA offload.
        - RAM Memory: 64GB.
        - Disks: 1 * 1 TB, Enterprise Class, High MTBF.
        - Physical Interfaces: 4 * 10GE SFP+.
        - Operating System: Native IxOS.

Servers

1. Intel Xeon servers:
    - 20 * SuperMicro SYS-7049GP-TRT with Xeon Skylake processors.
        - Chassis: SuperMicro SYS-7049GP-TRT.
        - Motherboard: SuperMicro X11DPG-QT.
        - Processors: 2* Intel Platinum 8180 2.3 GHz.
        - RAM Memory: 16* 16GB DDR4-2666MHz.
        - Disks: 2* 1.6TB 6G SATA SSD.
2. Arm Cortex A-72 servers
    - 2 * Huawei TaiShan 2280.
        - Chassis: Huawei TaiShan 2280.
        - Processors: 1* hip07-d05 ~ 64* Arm Cortex-A72.
        - RAM Memory: 8* 16GB DDR4-2400MT/s.
        - Disks: 1* 4TB SATA HDD.
    - 3 * MACCHIATObin
        - Chassis: MACCHIATObin.
        - Processors: 1* Armada 8040 ~ 4* Arm Cortex-A72.
        - RAM Memory: 1* 16GB DDR4.
        - Disks: 1* 128GB(?) SATA SDD.
3. Intel Atom servers with Rangely processors.
    - 3 * Netgate XG-2758-1u
        - Chassis: Netgate XG-2758-1u
        - Processors: 1* Rangely (Atom) C2758 2.4 GHz
        - RAM Memory: 16GB ECC
        - Disks: 150 GB

Network Interface Cards

1. 10GE NICs
    - 30 * X710-DA4.
    - 6 * X710-DA2.
    - 6 * X520-DA2.
2. 25GE NICs
    - 20 * XXV710-DA2.
3. 40GE NICs
    - 2 * XL710-QDA2.
4. 100GE NICs
    - none.

Pluggables and Cables

Pluggables: 

1. 10GE SFP+
    - 80 * Intel Ethernet SFP+ SR.
2. 25GE SFP28
    - None?
3. 40GE QSFP+
    - 20 * Intel® Ethernet QSFP+ Twinaxial Cable, 5 meters.
4. 100GE
    - None?

Standalone cables: 

1. 10GE
    - None?
2. 25GE
    - None?
3. 40GE
    - None?
4. 100GE
    - None?

Other Network Cards

Any QATs?

Installation Status

Lab installation status is tracked by LF IT team in FD.io Server Status.

Server/Device Management and Naming

Server Management Requirements

Total of 20 SM SYS-7049GP-TRT servers are made available for FD.IO CSIT testbed. For management purposes, each server must have following two ports connected to the management network:

  • 1GE IPMI port
    • IPMI - Intelligent Platform Management Interface.
    • Required for access to embedded server management with WebUI, CLI, SNMPv3, IPMIv2.0, for firmware (BIOS) and OS updates.
  • 1GE/10GE management port
    • hostOS management port for general system management.

Server and Port Naming Convention

Following naming convention is used within this page to specify physical connectivity and wiring across defined CSIT testbeds: 

- testbedname: testbedN.
- hostname:
    - traffic-generator: tN-tgW.
    - system-under-testX: tN-sutX.
- portnames:
    - tN-tgW-cY/pZ.
    - tN-sutX-cY/pZ.
- where:
    - N - testbed number.
    - tgW - server acts as traffic-generator with W index.
    - sutX - server acts as system-under-test with X index.
    - Y - PCIe slot number denoting a NIC card number within the host.
        - Y=2,4,9 - slots connected to NUMA node 0.
        - Y=6,8,10 - slots connected to NUMA node 1.
    - Z - port number on the NIC card.

Server Management - Addressing

Each server has a LOM (Lights-Out-Management e.g. SM IPMI) and a Management port, which are connected to two different VLANs. 

1. LOM (IPMI) VLAN:
    - Subnet: 10.30.50.0/24
    - Gateway: 10.30.50.1
    - Broadcast: 10.30.50.255
    - DNS1: 199.204.44.24
    - DNS2: 199.204.47.54
2. Management Vlan:
    - Subnet: 10.30.51.0/24
    - Gateway: 10.30.51.1
    - Broadcast: 10.30.51.255
    - DNS1: 199.204.44.24
    - DNS2: 199.204.47.54

To access these hosts, an VPN connection is required.

LOM (IPMI) VLAN IP Addresses

<..>

Management VLAN IP Addresses

<..>

Testbeds Specification - Target Build

Server/Ports Naming, NIC Placement

1-Node Xeon

Each server in 1-node Xeon topology has its NIC cards placed, and NIC cards and ports indexed per following specification: 

- Server1 [Type-6]:
    - testbedname: testbed11.
    - hostname: s1-t11-sut1.
    - IPMI IP: <TODO(lf)>
    - Host IP: <TODO(lf)>
    - portnames:
        - s1-t11-sut1-c2/p1 - 10GE-port1 x710-4p10GE.
        - s1-t11-sut1-c2/p2 - 10GE-port2 x710-4p10GE.
        - s1-t11-sut1-c2/p3 - 10GE-port3 x710-4p10GE.
        - s1-t11-sut1-c2/p4 - 10GE-port4 x710-4p10GE.
        - s1-t11-sut1-c4/p1 - 10GE-port1 x710-4p10GE.
        - s1-t11-sut1-c4/p2 - 10GE-port2 x710-4p10GE.
        - s1-t11-sut1-c4/p3 - 10GE-port3 x710-4p10GE.
        - s1-t11-sut1-c4/p4 - 10GE-port4 x710-4p10GE.
- Server2 [Type-6]:
    - testbedname: testbed12.
    - hostname: s2-t12-sut1.
    - IPMI IP: <TODO(lf)>
    - Host IP: <TODO(lf)>
    - portnames:
        - s2-t12-sut1-c2/p1 - 10GE-port1 x710-4p10GE.
        - s2-t12-sut1-c2/p2 - 10GE-port2 x710-4p10GE.
        - s2-t12-sut1-c2/p3 - 10GE-port3 x710-4p10GE.
        - s2-t12-sut1-c2/p4 - 10GE-port4 x710-4p10GE.
        - s2-t12-sut1-c4/p1 - 10GE-port1 x710-4p10GE.
        - s2-t12-sut1-c4/p2 - 10GE-port2 x710-4p10GE.
        - s2-t12-sut1-c4/p3 - 10GE-port3 x710-4p10GE.
        - s2-t12-sut1-c4/p4 - 10GE-port4 x710-4p10GE.

2-Node Xeon

Each server in 2-node Xeon topology has its NIC cards placed, and NIC cards and ports indexed per following specification: 

- Server3 [Type-1]:
    - testbedname: testbed21.
    - hostname: s3-t21-sut1.
    - IPMI IP: 10.30.50.41
    - Host IP: 10.30.51.44
    - portnames:
        - s3-t21-sut1-c2/p1 - 10GE-port1 x710-4p10GE.
        - s3-t21-sut1-c2/p2 - 10GE-port2 x710-4p10GE.
        - s3-t21-sut1-c2/p3 - 10GE-port3 x710-4p10GE.
        - s3-t21-sut1-c2/p4 - 10GE-port4 x710-4p10GE.
        - s3-t21-sut1-c4/p1 - 25GE-port1 xxv710-DA2-2p25GE.
        - s3-t21-sut1-c4/p2 - 25GE-port2 xxv710-DA2-2p25GE.
        - s3-t21-sut1-c9/p1 - FUTURE 100GE-port1 ConnectX5-2p100GE.
        - s3-t21-sut1-c9/p2 - FUTURE 100GE-port2 ConnectX5-2p100GE.
- Server4 [Type-2]:
    - testbedname: testbed21.
    - hostname: s4-t21-tg1.
    - IPMI IP: 10.30.50.42
    - Host IP: 10.30.51.45
    - portnames:
        - s4-t21-tg1-c2/p1 - 10GE-port1 x710-4p10GE.
        - s4-t21-tg1-c2/p2 - 10GE-port2 x710-4p10GE.
        - s4-t21-tg1-c2/p3 - 10GE-port3 x710-4p10GE.
        - s4-t21-tg1-c2/p4 - 10GE-port4 x710-4p10GE.
        - s4-t21-tg1-c4/p1 - 25GE-port1 xxv710-DA2-2p25GE.
        - s4-t21-tg1-c4/p2 - 25GE-port2 xxv710-DA2-2p25GE.
        - s4-t21-tg1-c9/p1 - FUTURE 100GE-port1 ConnectX5-2p100GE.
        - s4-t21-tg1-c9/p2 - FUTURE 100GE-port2 ConnectX5-2p100GE.
- Server5 [Type-1]:
    - testbedname: testbed22.
    - hostname: s5-t22-sut1.
    - IPMI IP: <TODO(lf)>
    - Host IP: <TODO(lf)>
    - portnames:
        - s5-t22-sut1-c2/p1 - 10GE-port1 x710-4p10GE.
        - s5-t22-sut1-c2/p2 - 10GE-port2 x710-4p10GE.
        - s5-t22-sut1-c2/p3 - 10GE-port3 x710-4p10GE.
        - s5-t22-sut1-c2/p4 - 10GE-port4 x710-4p10GE.
        - s5-t22-sut1-c4/p1 - 25GE-port1 xxv710-DA2-2p25GE.
        - s5-t22-sut1-c4/p2 - 25GE-port2 xxv710-DA2-2p25GE.
        - s5-t22-sut1-c9/p1 - FUTURE 100GE-port1 ConnectX5-2p100GE.
        - s5-t22-sut1-c9/p2 - FUTURE 100GE-port2 ConnectX5-2p100GE.
- Server6 [Type-2]:
    - testbedname: testbed22.
    - hostname: s6-t22-tg1.
    - IPMI IP: <TODO(lf)>
    - Host IP: <TODO(lf)>
    - portnames:
        - s6-t22-tg1-c2/p1 - 10GE-port1 x710-4p10GE.
        - s6-t22-tg1-c2/p2 - 10GE-port2 x710-4p10GE.
        - s6-t22-tg1-c2/p3 - 10GE-port3 x710-4p10GE.
        - s6-t22-tg1-c2/p4 - 10GE-port4 x710-4p10GE.
        - s6-t22-tg1-c4/p1 - 25GE-port1 xxv710-DA2-2p25GE.
        - s6-t22-tg1-c4/p2 - 25GE-port2 xxv710-DA2-2p25GE.
        - s6-t22-tg1-c9/p1 - FUTURE 100GE-port1 ConnectX5-2p100GE.
        - s6-t22-tg1-c9/p2 - FUTURE 100GE-port2 ConnectX5-2p100GE.
- Server7 [Type-1]:
    - testbedname: testbed23.
    - hostname: s7-t23-sut1.
    - IPMI IP: <TODO(lf)>
    - Host IP: <TODO(lf)>
    - portnames:
        - s7-t23-sut1-c2/p1 - 10GE-port1 x710-4p10GE.
        - s7-t23-sut1-c2/p2 - 10GE-port2 x710-4p10GE.
        - s7-t23-sut1-c2/p3 - 10GE-port3 x710-4p10GE.
        - s7-t23-sut1-c2/p4 - 10GE-port4 x710-4p10GE.
        - s7-t23-sut1-c4/p1 - 25GE-port1 xxv710-DA2-2p25GE.
        - s7-t23-sut1-c4/p2 - 25GE-port2 xxv710-DA2-2p25GE.
        - s7-t23-sut1-c9/p1 - FUTURE 100GE-port1 ConnectX5-2p100GE.
        - s7-t23-sut1-c9/p2 - FUTURE 100GE-port2 ConnectX5-2p100GE.
- Server8 [Type-2]:
    - testbedname: testbed23.
    - hostname: s8-t23-tg1.
    - IPMI IP: <TODO(lf)>
    - Host IP: <TODO(lf)>
    - portnames:
        - s8-t23-tg1-c2/p1 - 10GE-port1 x710-4p10GE.
        - s8-t23-tg1-c2/p2 - 10GE-port2 x710-4p10GE.
        - s8-t23-tg1-c2/p3 - 10GE-port3 x710-4p10GE.
        - s8-t23-tg1-c2/p4 - 10GE-port4 x710-4p10GE.
        - s8-t23-tg1-c4/p1 - 25GE-port1 xxv710-DA2-2p25GE.
        - s8-t23-tg1-c4/p2 - 25GE-port2 xxv710-DA2-2p25GE.
        - s8-t23-tg1-c9/p1 - FUTURE 100GE-port1 ConnectX5-2p100GE.
        - s8-t23-tg1-c9/p2 - FUTURE 100GE-port2 ConnectX5-2p100GE.
- Server9 [Type-1]:
    - testbedname: testbed24.
    - hostname: s9-t24-sut1.
    - IPMI IP: <TODO(lf)>
    - Host IP: <TODO(lf)>
    - portnames:
        - s9-t24-sut1-c2/p1 - 10GE-port1 x710-4p10GE.
        - s9-t24-sut1-c2/p2 - 10GE-port2 x710-4p10GE.
        - s9-t24-sut1-c2/p3 - 10GE-port3 x710-4p10GE.
        - s9-t24-sut1-c2/p4 - 10GE-port4 x710-4p10GE.
        - s9-t24-sut1-c4/p1 - 25GE-port1 xxv710-DA2-2p25GE.
        - s9-t24-sut1-c4/p2 - 25GE-port2 xxv710-DA2-2p25GE.
        - s9-t24-sut1-c9/p1 - FUTURE 100GE-port1 ConnectX5-2p100GE.
        - s9-t24-sut1-c9/p2 - FUTURE 100GE-port2 ConnectX5-2p100GE.
- Server10 [Type-2]:
    - testbedname: testbed21.
    - hostname: s10-t24-tg1.
    - IPMI IP: <TODO(lf)>
    - Host IP: <TODO(lf)>
    - portnames:
        - s10-t24-tg1-c2/p1 - 10GE-port1 x710-4p10GE.
        - s10-t24-tg1-c2/p2 - 10GE-port2 x710-4p10GE.
        - s10-t24-tg1-c2/p3 - 10GE-port3 x710-4p10GE.
        - s10-t24-tg1-c2/p4 - 10GE-port4 x710-4p10GE.
        - s10-t24-tg1-c4/p1 - 25GE-port1 xxv710-DA2-2p25GE.
        - s10-t24-tg1-c4/p2 - 25GE-port2 xxv710-DA2-2p25GE.
        - s10-t24-tg1-c9/p1 - FUTURE 100GE-port1 ConnectX5-2p100GE.
        - s10-t24-tg1-c9/p2 - FUTURE 100GE-port2 ConnectX5-2p100GE.

3-Node Xeon

Each server in 3-node Xeon topology has its NIC cards placed, and NIC cards and ports indexed per following specification: 

- Server11 [Type-1]:
    - testbedname: testbed31.
    - hostname: s11-t31-sut1.
    - IPMI IP: 10.30.50.43
    - Host IP: 10.30.51.46
    - portnames:
        - s11-t31-sut1-c2/p1 - 10GE-port1 x710-4p10GE.
        - s11-t31-sut1-c2/p2 - 10GE-port2 x710-4p10GE.
        - s11-t31-sut1-c2/p3 - 10GE-port3 x710-4p10GE.
        - s11-t31-sut1-c2/p4 - 10GE-port4 x710-4p10GE.
        - s11-t31-sut1-c4/p1 - 25GE-port1 xxv710-DA2-2p25GE.
        - s11-t31-sut1-c4/p2 - 25GE-port2 xxv710-DA2-2p25GE.
        - s11-t31-sut1-c9/p1 - FUTURE 100GE-port1 ConnectX5-2p100GE.
        - s11-t31-sut1-c9/p2 - FUTURE 100GE-port2 ConnectX5-2p100GE.
- Server12 [Type-1]:
    - testbedname: testbed31.
    - hostname: s12-t31-sut2.
    - IPMI IP: 10.30.50.44
    - Host IP: 10.30.51.47
    - portnames:
        - s12-t31-sut2-c2/p1 - 10GE-port1 x710-4p10GE.
        - s12-t31-sut2-c2/p2 - 10GE-port2 x710-4p10GE.
        - s12-t31-sut2-c2/p3 - 10GE-port3 x710-4p10GE.
        - s12-t31-sut2-c2/p4 - 10GE-port4 x710-4p10GE.
        - s12-t31-sut2-c4/p1 - 25GE-port1 xxv710-DA2-2p25GE.
        - s12-t31-sut2-c4/p2 - 25GE-port2 xxv710-DA2-2p25GE.
        - s12-t31-sut2-c9/p1 - FUTURE 100GE-port1 ConnectX5-2p100GE.
        - s12-t31-sut2-c9/p2 - FUTURE 100GE-port2 ConnectX5-2p100GE.
- Server13 [Type-2]:
    - testbedname: testbed31.
    - hostname: s13-t31-tg1.
    - IPMI IP: 10.30.50.45
    - Host IP: 10.30.51.48
    - portnames:
        - s13-t31-tg1-c2/p1 - 10GE-port1 x710-4p10GE.
        - s13-t31-tg1-c2/p2 - 10GE-port2 x710-4p10GE.
        - s13-t31-tg1-c2/p3 - 10GE-port3 x710-4p10GE.
        - s13-t31-tg1-c2/p4 - 10GE-port4 x710-4p10GE.
        - s13-t31-tg1-c4/p1 - 25GE-port1 xxv710-DA2-2p25GE.
        - s13-t31-tg1-c4/p2 - 25GE-port2 xxv710-DA2-2p25GE.
        - s13-t31-tg1-c9/p1 - FUTURE 100GE-port1 ConnectX5-2p100GE.
        - s13-t31-tg1-c9/p2 - FUTURE 100GE-port2 ConnectX5-2p100GE.
- Server14 [Type-1]:
    - testbedname: testbed32.
    - hostname: s14-t32-sut1.
    - IPMI IP: <TODO(lf)>
    - Host IP: <TODO(lf)>
    - portnames:
        - s14-t32-sut1-c2/p1 - 10GE-port1 x710-4p10GE.
        - s14-t32-sut1-c2/p2 - 10GE-port2 x710-4p10GE.
        - s14-t32-sut1-c2/p3 - 10GE-port3 x710-4p10GE.
        - s14-t32-sut1-c2/p4 - 10GE-port4 x710-4p10GE.
        - s14-t32-sut1-c4/p1 - 25GE-port1 xxv710-DA2-2p25GE.
        - s14-t32-sut1-c4/p2 - 25GE-port2 xxv710-DA2-2p25GE.
        - s14-t32-sut1-c9/p1 - FUTURE 100GE-port1 ConnectX5-2p100GE.
        - s14-t32-sut1-c9/p2 - FUTURE 100GE-port2 ConnectX5-2p100GE.
- Server15 [Type-1]:
    - testbedname: testbed32.
    - hostname: s15-t32-sut2.
    - IPMI IP: <TODO(lf)>
    - Host IP: <TODO(lf)>
    - portnames:
        - s15-t32-sut2-c2/p1 - 10GE-port1 x710-4p10GE.
        - s15-t32-sut2-c2/p2 - 10GE-port2 x710-4p10GE.
        - s15-t32-sut2-c2/p3 - 10GE-port3 x710-4p10GE.
        - s15-t32-sut2-c2/p4 - 10GE-port4 x710-4p10GE.
        - s15-t32-sut2-c4/p1 - 25GE-port1 xxv710-DA2-2p25GE.
        - s15-t32-sut2-c4/p2 - 25GE-port2 xxv710-DA2-2p25GE.
        - s15-t32-sut2-c9/p1 - FUTURE 100GE-port1 ConnectX5-2p100GE.
        - s15-t32-sut2-c9/p2 - FUTURE 100GE-port2 ConnectX5-2p100GE.
- Server16 [Type-2]:
    - testbedname: testbed32.
    - hostname: s16-t32-tg1.
    - IPMI IP: <TODO(lf)>
    - Host IP: <TODO(lf)>
    - portnames:
        - s16-t32-tg1-c2/p1 - 10GE-port1 x710-4p10GE.
        - s16-t32-tg1-c2/p2 - 10GE-port2 x710-4p10GE.
        - s16-t32-tg1-c2/p3 - 10GE-port3 x710-4p10GE.
        - s16-t32-tg1-c2/p4 - 10GE-port4 x710-4p10GE.
        - s16-t32-tg1-c4/p1 - 25GE-port1 xxv710-DA2-2p25GE.
        - s16-t32-tg1-c4/p2 - 25GE-port2 xxv710-DA2-2p25GE.
        - s16-t32-tg1-c9/p1 - FUTURE 100GE-port1 ConnectX5-2p100GE.
        - s16-t32-tg1-c9/p2 - FUTURE 100GE-port2 ConnectX5-2p100GE.

3-Node Arm

Note: Server19 (TG) is shared between testbed33 & testbed34 

- Server17 [Type-3]:
    - testbedname: testbed33.
    - hostname: s17-t33-sut1.
    - IPMI IP: 10.30.50.36
    - Host IP: 10.30.51.36
    - portnames:
        - s17-t33-sut1-ca/p1 - 10GE-port1 82599-2p10GE.
        - s17-t33-sut1-ca/p2 - 10GE-port2 82599-2p10GE.
        - s17-t33-sut1-c2/p1 - 25GE-port1 cx4-2p25GE.
        - s17-t33-sut1-c2/p2 - 25GE-port2 cx4-2p25GE.
- Server18 [Type-3]:
    - testbedname: testbed33.
    - hostname: s18-t33-sut2.
    - IPMI IP: 10.30.50.37
    - Host IP: 10.30.51.37
    - portnames:
        - s18-t33-sut2-ca/p1 - 10GE-port1 82599-2p10GE.
        - s18-t33-sut2-ca/p2 - 10GE-port2 82599-2p10GE.
        - s18-t33-sut2-c2/p1 - 25GE-port1 cx4-2p25GE.
        - s18-t33-sut2-c2/p2 - 25GE-port2 cx4-2p25GE.
- Server19 [Type-2]:
    - testbedname: testbed33.
    - hostname: s19-t33t34-tg1.
    - IPMI IP: 10.30.50.46
    - Host IP: 10.30.51.49
    - portnames:
        - s19-t33t34-tg1-c2/p1 - 10GE-port1 x710-4p10GE.
        - s19-t33t34-tg1-c2/p2 - 10GE-port2 x710-4p10GE.
        - s19-t33t34-tg1-c2/p3 - 10GE-port3 x710-4p10GE.
        - s19-t33t34-tg1-c2/p4 - 10GE-port4 x710-4p10GE.
        - s19-t33t34-tg1-c4/p1 - 25GE-port1 xxv710-DA2-2p25GE.
        - s19-t33t34-tg1-c4/p2 - 25GE-port2 xxv710-DA2-2p25GE.
- Server20 [Type-4]:
    - testbedname: testbed34.
    - hostname: s20-t34-sut1.
    - IPMI IP: N/A
    - Host IP: 10.30.51.41
    - portnames:
        - s20-t34-sut1-ca/p1 - 10GE-port1 Marvell.
        - s20-t34-sut1-ca/p2 - 10GE-port2 Marvell.
- Server21 [Type-4]:
    - testbedname: testbed34.
    - hostname: s21-t34-sut2.
    - IPMI IP: N/A
    - Host IP: 10.30.51.42
    - portnames:
        - s21-t34-sut2-ca/p1 - 10GE-port1 Marvell.
        - s21-t34-sut2-ca/p2 - 10GE-port2 Marvell.

TCP/IP and L47

Each server (appliance) in 2-node TCP/IP topology has its NIC cards placed, and NIC cards and ports indexed per following specification: 

- Server25 [Type-8]:
    - testbedname: testbed25.
    - hostname: s25-t25-sut1.
    - IPMI IP: <TODO(lf)>
    - Host IP: <TODO(lf)>
    - portnames:
        - s25-t25-sut1-c2/p1 - 10GE-port1 x710-4p10GE.
        - s25-t25-sut1-c2/p2 - 10GE-port2 x710-4p10GE.
        - s25-t25-sut1-c2/p3 - 10GE-port3 x710-4p10GE.
        - s25-t25-sut1-c2/p4 - 10GE-port4 x710-4p10GE.
- Server26 [Type-7]:
    - testbedname: testbed25.
    - hostname: s26-t25-tg1.
    - Host IP: <TODO(lf)>
    - portnames:
        - s26-t25-tg1-p1 - 10GE-port1.
        - s26-t25-tg1-p2 - 10GE-port2.
        - s26-t25-tg1-p3 - 10GE-port3.
        - s26-t25-tg1-p4 - 10GE-port4.

3-Node Atom

Note: There is no IPMI. Serial console is accessible via VIRL2 and VIRL3 USB. 

- Server22 [Type-5]:
    - testbedname: testbed35.
    - hostname: s22-t35-sut1 (vex-yul-rot-netgate-1).
    - IPMI IP: 10.30.51.29 - screen -r /dev/ttyUSB0
    - Host IP: 10.30.51.9
    - portnames:
        - s22-t35-sut1-p1 - 10GE-port1 ix0 82599.
        - s22-t35-sut1-p2 - 10GE-port2 ix1 82599.
    - 1GB ports (tbd)
- Server23 [Type-5]:
    - testbedname: testbed35.
    - hostname: s23-t35-sut2 (vex-yul-rot-netgate-2).
    - IPMI IP: 10.30.51.30 - screen -r /dev/ttyUSB1
    - Host IP: 10.30.51.10
    - portnames:
        - s23-t35-sut1-p1 - 10GE-port1 ix0 82599.
        - s23-t35-sut1-p2 - 10GE-port2 ix1 82599.
    - 1GB ports (tbd)
- Server24 [Type-5]:
    - testbedname: testbed35.
    - hostname: s24-t35-sut3 (vex-yul-rot-netgate-3).
    - IPMI IP: 10.30.51.30 - screen -r /dev/ttyUSB2
    - Host IP: 10.30.51.11
    - portnames:
        - s24-t35-sut1-p1 - 10GE-port1 ix0 82599.
        - s24-t35-sut1-p2 - 10GE-port2 ix1 82599.
    - 1GB ports (tbd)

Physical Connectivity within Testbeds

1-Node Xeon

Two 1-Node testbeds are constructed by connecting 2 Xeon servers using below specification: 

- testbed11:
    - ring1 10GE-ports x710-4p10GE:
        - s1-t11-sut1-c2/p1 to s1-t11-sut1-c4/p1.
    - ring2 10GE-ports x710-4p10GE:
        - s1-t11-sut1-c2/p2 to s1-t11-sut1-c4/p2.
    - ring3 10GE-ports x710-4p10GE:
        - s1-t11-sut1-c2/p3 to s1-t11-sut1-c4/p3.
    - ring4 10GE-ports x710-4p10GE:
        - s1-t11-sut1-c2/p3 to s1-t11-sut1-c4/p3.
- testbed12:
    - ring1 10GE-ports x710-4p10GE:
        - s2-t12-sut1-c2/p1 to s2-t12-sut1-c4/p1.
    - ring2 10GE-ports x710-4p10GE:
        - s2-t12-sut1-c2/p2 to s2-t12-sut1-c4/p2.
    - ring3 10GE-ports x710-4p10GE:
        - s2-t12-sut1-c2/p3 to s2-t12-sut1-c4/p3.
    - ring4 10GE-ports x710-4p10GE:
        - s2-t12-sut1-c2/p3 to s2-t12-sut1-c4/p3.

2-Node Xeon

Four 2-Node testbeds are constructed by connecting 8 Xeon servers using below specification: 

- testbed21:
    - ring1 10GE-ports x710-4p10GE on SUT:
        - t21-tg1-c2/p1 to t21-sut1-c2/p1.
        - t21-sut1-c2/p2 to t21-tg1-c2/p2.
    - ring2 10GE-ports x710-4p10GE on SUT:
        - t21-tg1-c2/p3 to t21-sut1-c2/p3.
        - t21-sut1-c2/p4 to t21-tg1-c2/p4.
    - ring3 25GE-ports xxv710-DA2-2p25GE on SUT
        - t21-tg1-c4/p1 to t21-sut1-c4/p1.
        - t21-sut1-c4/p2 to t21-tg1-c4/p2.
    - FUTURE ring4 100GE-ports ConnectX5-2p100GE on SUT:
        - t21-tg1-c9/p1 to t21-sut1-c9/p1.
        - t21-sut1-c9/p2 to t21-tg1-c9/p2.
    - ring5 10GE-ports x710-4p10GE loopbacks on TG for self-tests:
        - t21-tg1-c10/p1 to t21-tg1-c10/p2.
        - t21-tg1-c10/p3 to t21-tg1-c10/p4.
- testbed22:
    - ring1 10GE-ports x710-4p10GE on SUT:
        - t22-tg1-c2/p1 to t22-sut1-c2/p1.
        - t22-sut1-c2/p2 to t22-tg1-c2/p2.
    - ring2 10GE-ports x710-4p10GE on SUT:
        - t22-tg1-c2/p3 to t22-sut1-c2/p3.
        - t22-sut1-c2/p4 to t22-tg1-c2/p4.
    - ring3 25GE-ports xxv710-DA2-2p25GE on SUT
        - t22-tg1-c4/p1 to t22-sut1-c4/p1.
        - t22-sut1-c4/p2 to t22-tg1-c4/p2.
    - FUTURE ring4 100GE-ports ConnectX5-2p100GE on SUT:
        - t22-tg1-c9/p1 to t22-sut1-c9/p1.
        - t22-sut1-c9/p2 to t22-tg1-c9/p2.
    - ring5 10GE-ports x710-4p10GE loopbacks on TG for self-tests:
        - t22-tg1-c10/p1 to t22-tg1-c10/p2.
        - t22-tg1-c10/p3 to t22-tg1-c10/p4.
- testbed23:
    - ring1 10GE-ports x710-4p10GE on SUT:
        - t23-tg1-c2/p1 to t23-sut1-c2/p1.
        - t23-sut1-c2/p2 to t23-tg1-c2/p2.
    - ring2 10GE-ports x710-4p10GE on SUT:
        - t23-tg1-c2/p3 to t23-sut1-c2/p3.
        - t23-sut1-c2/p4 to t23-tg1-c2/p4.
    - ring3 25GE-ports xxv710-DA2-2p25GE on SUT
        - t23-tg1-c4/p1 to t23-sut1-c4/p1.
        - t23-sut1-c4/p2 to t23-tg1-c4/p2.
    - FUTURE ring4 100GE-ports ConnectX5-2p100GE on SUT:
        - t23-tg1-c9/p1 to t23-sut1-c9/p1.
        - t23-sut1-c9/p2 to t23-tg1-c9/p2.
    - ring5 10GE-ports x710-4p10GE loopbacks on TG for self-tests:
        - t23-tg1-c10/p1 to t23-tg1-c10/p2.
        - t23-tg1-c10/p3 to t23-tg1-c10/p4.
- testbed24:
    - ring1 10GE-ports x710-4p10GE on SUT:
        - t24-tg1-c2/p1 to t24-sut1-c2/p1.
        - t24-sut1-c2/p2 to t24-tg1-c2/p2.
    - ring2 10GE-ports x710-4p10GE on SUT:
        - t24-tg1-c2/p3 to t24-sut1-c2/p3.
        - t24-sut1-c2/p4 to t24-tg1-c2/p4.
    - ring3 25GE-ports xxv710-DA2-2p25GE on SUT
        - t24-tg1-c4/p1 to t24-sut1-c4/p1.
        - t24-sut1-c4/p2 to t24-tg1-c4/p2.
    - FUTURE ring4 100GE-ports ConnectX5-2p100GE on SUT:
        - t24-tg1-c9/p1 to t24-sut1-c9/p1.
        - t24-sut1-c9/p2 to t24-tg1-c9/p2.
    - ring5 10GE-ports x710-4p10GE loopbacks on TG for self-tests:
        - t24-tg1-c10/p1 to t24-tg1-c10/p2.
        - t24-tg1-c10/p3 to t24-tg1-c10/p4.

3-Node Xeon

Two 3-Node testbeds are constructed by connecting 6 Xeon servers using below specification: 

- testbed31:
    - ring1 10GE-ports x710-4p10GE on SUTs:
        - t31-tg1-c2/p1 to t31-sut1-c2/p1.
        - t31-sut1-c2/p2 to t31-sut2-c2/p2.
        - t31-sut2-c2/p1 to t31-tg1-c2/p2.
    - ring2 10GE-ports x710-4p10GE on SUT:
        - t31-tg1-c2/p3 to t31-sut1-c2/p3.
        - t31-sut1-c2/p4 to t31-sut2-c2/p4.
        - t31-sut2-c2/p3 to t31-tg1-c2/p4.
    - ring3 25GE-ports xxv710-DA2-2p25GE on SUT
        - t31-tg1-c4/p1 to t31-sut1-c4/p1.
        - t31-sut1-c4/p2 to t31-sut2-c4/p2.
        - t31-sut2-c4/p1 to t31-tg1-c4/p2.
    - FUTURE ring4 100GE-ports ConnectX5-2p100GE on SUT:
        - t31-tg1-c9/p1 to t31-sut1-c9/p1.
        - t31-sut1-c9/p2 to t31-sut2-c9/p2.
        - t31-sut2-c9/p1 to t31-tg1-c9/p2.
    - ring5 10GE-ports x710-4p10GE loopbacks on TG for self-tests:
        - t31-tg1-c10/p1 to t31-tg1-c10/p2.
        - t31-tg1-c10/p3 to t31-tg1-c10/p4.
- testbed32:
    - ring1 10GE-ports x710-4p10GE on SUTs:
        - t32-tg1-c2/p1 to t32-sut1-c2/p1.
        - t32-sut1-c2/p2 to t32-sut2-c2/p2.
        - t32-sut2-c2/p1 to t32-tg1-c2/p2.
    - ring2 10GE-ports x710-4p10GE on SUT:
        - t32-tg1-c2/p3 to t32-sut1-c2/p3.
        - t32-sut1-c2/p4 to t32-sut2-c2/p4.
        - t32-sut2-c2/p3 to t32-tg1-c2/p4.
    - ring3 25GE-ports xxv710-DA2-2p25GE on SUT
        - t32-tg1-c4/p1 to t32-sut1-c4/p1.
        - t32-sut1-c4/p2 to t32-sut2-c4/p2.
        - t32-sut2-c4/p1 to t32-tg1-c4/p2.
    - FUTURE ring4 100GE-ports ConnectX5-2p100GE on SUT:
        - t32-tg1-c9/p1 to t32-sut1-c9/p1.
        - t32-sut1-c9/p2 to t32-sut2-c9/p2.
        - t32-sut2-c9/p1 to t32-tg1-c9/p2.
    - ring5 10GE-ports x710-4p10GE loopbacks on TG for self-tests:
        - t32-tg1-c10/p1 to t32-tg1-c10/p2.
        - t32-tg1-c10/p3 to t32-tg1-c10/p4.

3-Node Arm

One 3-Node testbed is constructed by connecting 3 Arm servers using below specification: 

- testbed33:
    - ring1 10GE-ports 82599-2p10GE on SUTs:
        - t33t34-tg1-c2/p1 - t33-sut1-ca/p1.
        - t33-sut1-ca/p2 - t33-sut2-ca/p1.
        - t33-sut2-ca/p2 - t33t34-tg1-c2/p2.
    - ring2 25GE-ports cx4-2p25GE on SUTs:
        - t33t34-tg1-c4/p1 - t33-sut1-c2/p1.
        - t33-sut1-c2/p2 - t33-sut2-c2/p1.
        - t33-sut2-c2/p2 - t33t34-tg1-c4/p2.
- testbed34:
    - ring1 10GE-ports Marvell on SUTs:
        - t33t34-tg1-c2/p3 - t34-sut1-ca/p1.
        - t34-sut1-ca/p2 - t34-sut2-ca/p1.
        - t34-sut2-ca/p2 - t33t34-tg1-c2/p4.

TCP/IP and L47

One 2-Node TCP/IP testbed is constructed by connecting Ixia PSOne and 1 Xeon server using below specification: 

- testbed25:
    - link1 10GE-port x710-4p10GE on SUT:
        - t25-tg1-p1 to t25-sut1-c2/p1.
    - link2 10GE-port x710-4p10GE on SUT:
        - t25-tg1-p2 to t25-sut1-c2/p2.
    - link3 10GE-port x710-4p10GE on SUT:
        - t25-tg1-p3 to t25-sut1-c2/p3.
    - link4 10GE-port x710-4p10GE on SUT:
        - t25-tg1-p4 to t25-sut1-c2/p4.

3-Node Atom

<..>

Host OS and configuration

<..>

SUTs

<..>

TG

<..>

Server Specification

The new FD.io CSIT-CPL lab (is expected to contain|contains) following hardware server configurations: 

1. Type-1: Purpose - (Intel Xeon Processor) SUT for SW Data Plane Workload i.e. VPP, testpmd.
    - Quantity: TBD based on testbed allocation.
    - Physical connectivity:
        - IPMI and host management ports.
        - NIC ports connected into 2-node and 3-node topologies.
    - Main HW configuration:
        - Chassis: SuperMicro SYS-7049GP-TRT.
        - Motherboard: SuperMicro X11DPG-QT.
        - Processors: 2* Intel Platinum 8180 2.3 GHz.
        - RAM Memory: 16* 16GB DDR4-2666MHz.
        - Disks: 2* 1.6TB 6G SATA SSD.
    - NICs configuration:
        - Numa0: (x16, x16, x16 PCIe3.0 lanes)
            - PCIe Slot2 18:00.xx: x710-4p10GE Intel.
            - PCIe Slot4 3b:00.xx: xxv710-DA2-2p25GE Intel.
            - PCIe Slot9 5e:00.xx: FUTURE ConnectX5-2p100GE Mellanox.
        - Numa1: (x16, x16, x16 PCIe3.0 lanes)
            - PCIe Slot6 86:00.xx: empty.
            - PCIe Slot8 af:00.xx: empty.
            - PCIe Slot10 d8:00.xx: empty.
2. Type-2: Purpose - (Intel Xeon Processor) TG for T-Rex.
    - Quantity: TBD based on testbed allocation.
    - Physical connectivity:
        - IPMI and host management ports.
        - NIC ports connected into 2-node and 3-node topologies.
    - Main HW configuration:
        - Chassis: SuperMicro SYS-7049GP-TRT.
        - Motherboard: SuperMicro X11DPG-QT.
        - Processors: 2* Intel Platinum 8180 2.3 GHz.
        - RAM Memory: 16* 16GB DDR4-2666MHz.
        - Disks: 2* 1.6TB 6G SATA SSD.
    - NICs configuration:
        - Numa0: (x16, x16, x16 PCIe3.0 lanes)
            - PCIe Slot2 18:00.xx: x710-4p10GE Intel.
            - PCIe Slot4 3b:00.xx: xxv710-DA2 2p25GE Intel.
            - PCIe Slot9 5e:00.xx: FUTURE ConnectX5-2p100GE Mellanox.
        - Numa1: (x16, x16, x16 PCIe3.0 lanes)
            - PCIe Slot6 86:00.xx: empty.
            - PCIe Slot8 af:00.xx: empty.
            - PCIe Slot10 d8:00.xx: x710-4p10GE Intel.
3. Type-3: Purpose - (Arm hip07-d05 Processor) SUT for SW Data Plane Workload i.e. VPP, testpmd.
    - Quantity: 2
    - Physical connectivity:
        - IPMI(?) and host management ports.
        - NIC ports connected into 3-node topology.
    - Main HW configuration:
        - Chassis: Huawei TaiShan 2280.
        - Processors: 1* hip07-d05 ~ 64* Arm Cortex-A72
        - RAM Memory: 8* 16GB DDR4-2400MT/s
        - Disks: 1* 4TB SATA HDD
    - NICs configuration:
        - PCIe Slot2 e9:00.xx: connectx4-2p25GE Mellanox.
        - PCIe Slota 11:00.xx: 82599-2p10GE Intel.
4. Type-4: Purpose - (Arm Armada 8040 Processor) SUT for SW Data Plane Workload i.e. VPP, testpmd.
    - Quantity: 3
    - Physical connectivity:
        - Host management ports.
        - NIC ports connected into 2-node and 3-node topologies.
    - Main HW configuration:
        - Chassis: MACCHIATObin.
        - Processors: 1* Armada 8040 ~ 4* Arm Cortex-A72
        - RAM Memory: 1* 16GB DDR4
        - Disks: 1* 128GB(?) SATA SDD
    - NICs configuration:
        - pp2-2p10GE Marvell (on-chip Ethernet ports ; marvell plugin in VPP)
5. Type-5: Purpose - (Intel Atom Processor) SUT for SW Data Plane Workload i.e. VPP, testpmd.
    - Quantity: TBD based on testbed allocation.
    - Physical connectivity:
        - Management: serial Port (usb) for console
        - NIC ports connected into 2-node.
    - Main HW configuration:
        - Chassis: Netgate XG-2758-1u
        - Processors: 1* Rangely (Atom) C2758 2.4 GHz
        - RAM Memory: 16GB ECC
        - Disks: 150 GB
    - NICs configuration:
        - 2x 10Gb Intel 82599ES
        - 4x 1GB Intel I354
6. Type-6: Purpose - (Intel Xeon Processor) SUT for VPP_Device functional tests.
    - Quantity: 1.
    - Physical connectivity:
        - IPMI and host management ports.
        - NIC ports connected into 2-node and 3-node topologies.
    - Main HW configuration:
        - Chassis: SuperMicro SYS-7049GP-TRT.
        - Motherboard: SuperMicro X11DPG-QT.
        - Processors: 2* Intel Platinum 8180 2.3 GHz.
        - RAM Memory: 16* 16GB DDR4-2666MHz.
        - Disks: 2* 1.6TB 6G SATA SSD.
    - NICs configuration:
        - Numa0: (x16, x16, x16 PCIe3.0 lanes)
            - PCIe Slot2 18:00.xx: x710-4p10GE Intel.
            - PCIe Slot4 3b:00.xx: x710-4p10GE Intel.
            - PCIe Slot9 5e:00.xx: empty.
        - Numa1: (x16, x16, x16 PCIe3.0 lanes)
            - PCIe Slot6 86:00.xx: empty.
            - PCIe Slot8 af:00.xx: empty.
            - PCIe Slot10 d8:00.xx: empty.
7. Type-7: Purpose - Ixia PerfectStorm One Appliance TG for TCP/IP performance tests.
    - Quantity: 1.
    - Physical connectivity:
        - Host management interface: 10/100/1000-BaseT.
        - 8-port 10GE SFP+ integrated NIC.
    - Main HW configuration:
        - Chassis: PS10GE4NG.
        - Motherboard: SuperMicro X11DPG-QT.
        - Processors: Quad-Core, Intel Processor.
        - HW accelerators: FPGA offload.
        - RAM Memory: 64GB.
        - Disks: 1 * 1 TB, Enterprise Class, High MTBF.
        - Physical Interfaces: 4 * 10GE SFP+.
        - Operating System: Native IxOS.
    - Interface configuration:
        - Port-1: 10GE SFP+.
        - Port-2: 10GE SFP+.
        - Port-3: 10GE SFP+.
        - Port-4: 10GE SFP+.
8. Type-8: Purpose - (Intel Xeon Processor) SUT for TCP/IP host stack tests.
    - Quantity: 1.
    - Physical connectivity:
        - IPMI and host management ports.
        - NIC ports.
    - Main HW configuration:
        - Chassis: SuperMicro SYS-7049GP-TRT.
        - Motherboard: SuperMicro X11DPG-QT.
        - Processors: 2* Intel Platinum 8180 2.3 GHz.
        - RAM Memory: 16* 16GB DDR4-2666MHz.
        - Disks: 2* 1.6TB 6G SATA SSD.
    - NICs configuration:
        - Numa0: (x16, x16, x16 PCIe3.0 lanes)
            - PCIe Slot2 18:00.xx: x710-4p10GE Intel.
            - PCIe Slot4 3b:00.xx: empty.
            - PCIe Slot9 5e:00.xx: empty.
        - Numa1: (x16, x16, x16 PCIe3.0 lanes)
            - PCIe Slot6 86:00.xx: empty.
            - PCIe Slot8 af:00.xx: empty.
            - PCIe Slot10 d8:00.xx: empty.

Initial Build (Deprecated)

Physical Connectivity within Testbeds

2-Node Xeon

One 2-Node testbeds are constructed by connecting 8 Xeon servers using below specification: 

1. testbed21:
   - ring3 40GE-ports xl710-2p40GE on SUT
       - t21-tg1-c4/p1 to t21-sut1-c4/p1.
       - t21-sut1-c4/p2 to t21-tg1-c4/p2.

3-Node Xeon

1. testbed31:
   - ring1 10GE-ports x710-2p10GE on SUTs:
       - t31-tg1-c2/p1 to t31-sut1-c2/p1.
       - t31-sut1-c2/p2 to t31-sut2-c2/p2.
       - t31-sut2-c2/p1 to t31-tg1-c2/p2.
   - ring2 10GE-ports x710-2p10GE on SUT:
       - t31-tg1-c4/p1 to t31-sut1-c4/p1.
       - t31-sut1-c4/p2 to t31-sut2-c4/p2.
       - t31-sut2-c4/p1 to t31-tg1-c4/p2.

2-Node Atom

1. testbed35:
   - (tbd)

3-Node Atom

1. testbed35:
   - (tbd)
Retrieved from "https://wiki.fd.io/index.php?title=CSIT/fdio_csit_lab_ext_lld_draft&oldid=7907"