Difference between revisions of "VPP/How To Build The Sample Plugin"
(→Install the vpp-dev package) |
(installation was broken) |
||
Line 19: | Line 19: | ||
$ cd /tmp/sample-plugin | $ cd /tmp/sample-plugin | ||
$ gunzip -f *gz sample/*gz | $ gunzip -f *gz sample/*gz | ||
+ | $ libtoolize | ||
+ | $ aclocal | ||
+ | $ autoconf | ||
+ | $ autoheader | ||
+ | $ automake --add-missing | ||
+ | $ automake | ||
$ chmod +x configure | $ chmod +x configure | ||
$ ./configure --with-plugin-toolkit | $ ./configure --with-plugin-toolkit |
Revision as of 18:37, 2 March 2016
Contents
Introduction
This page explains how to build the sample vpp-engine plug-in. Anything that can be done by code compiled into the VPP engine itself can also be done from a plug-in.
Setting Up
Test the VPP executable, if you have not done so already. Verify proper operation. We recommend that you do not try to build the sample plug-in until you verify that basic operations of the VPP application work as expected.
Install the vpp-dev package
Copy the sample plug-in sources to the directory of your choice, and decompress the individual files.
For example:
$ sudo sh $ cd /usr/share/doc/vpp/examples $ tar cf - . | (cd /tmp; tar xf -) $ cd /tmp/sample-plugin $ gunzip -f *gz sample/*gz $ libtoolize $ aclocal $ autoconf $ autoheader $ automake --add-missing $ automake $ chmod +x configure $ ./configure --with-plugin-toolkit $ make # sudo make install
Install the Sample Plug-in
The sample plug-in (generated) Makefile installs the data-plane plug-in in /usr/lib/vpp_plugins. Similarly, it installs the API test harness plug-in in /usr/lib/vpp_api_test_plugins.
Take a look at the sample data-plane and API test client plug-in source code.
Start the VPP data-plane:
# start vpp
Note: if you start the vpp data plane manually ("# vpe unix interactive"), you should see a cheerful message of the form:
load_one_plugin:75: Loaded plugin: /usr/lib/vpp_plugins/sample_plugin.so.0.0.0
Test the Sample (macswap) Plug-in
Try the sample application, which diverts all packets from specific physical interfaces to a graph node which swaps rx packet src and dst MAC addresses. To configure data plane, execute /cisco/bin/vpe_api_test:
# vpe_api_test load_one_plugin:49: Loaded plugin: /usr/lib/vpp_api_test_plugins/sample_test_plugin.so.0.0.0 vat#
Note the cheerful message which confirms that the api test tool has loaded its plug-in.
vat# dump_interface_table # displays a list of interfaces, similar to the following: Interface sw_if_index GigabitEthernet2/2/0 5 GigabitEthernet2/3/0 6 GigabitEthernet2/4/0 7 GigabitEthernet2/5/0 8 GigabitEthernet2/6/0 9 GigabitEthernet2/7/0 10 local0 0 # to enable the mac-swap plugin on a specific interface: vat# sample_macswap_enable_disable <interface-name> # to disable the mac-swap plugin on a specific interface: vat# sample_macswap_enable_disable <interface-name> disable # capture a packet trace, with the swap plugin enabled vat# exec trace add dpdk-input 10
When you inspect the packet trace, you should see something similar to the output shown below. [If the trace buffer is empty, please make sure that the interface is up...]
vat# exec show trace # Note the "sample" trace, which demonstrates that the plugin is working # Note also the src and dst mac addresses are swapped... 00:11:32:956278: dpdk-input GigabitEthernet2/2/0 rx queue 0 buffer 0x18db40: current data 0, length 102, free-list 0, totlen-nifb 0, trace 0x9 PKT MBUF: port 0, nb_segs 1, pkt_len 102 buf_len 2304, data_len 102, ol_flags 0x0 IP4: 00:55:56:b7:05:03 -> 00:50:56:b7:05:bd ICMP: 6.0.2.2 -> 6.0.2.6 tos 0x00, ttl 64, length 84, checksum 0x47f1 fragment id 0xe2b0, flags DONT_FRAGMENT ICMP echo_request checksum 0x245f 00:11:32:956286: sample SAMPLE: sw_if_index 5 <================ 00:11:32:956290: GigabitEthernet2/2/0-output GigabitEthernet2/2/0 IP4: 00:50:56:b7:05:bd -> 00:55:56:b7:05:03 ICMP: 6.0.2.2 -> 6.0.2.6 tos 0x00, ttl 64, length 84, checksum 0x47f1 fragment id 0xe2b0, flags DONT_FRAGMENT ICMP echo_request checksum 0x245f 00:11:32:956291: GigabitEthernet2/2/0-tx GigabitEthernet2/2/0 tx queue 0 buffer 0x18db40: current data 0, length 102, free-list 0, totlen-nifb 0, trace 0x9 IP4: 00:50:56:b7:05:bd -> 00:55:56:b7:05:03 ICMP: 6.0.2.2 -> 6.0.2.6 tos 0x00, ttl 64, length 84, checksum 0x47f1 fragment id 0xe2b0, flags DONT_FRAGMENT ICMP echo_request checksum 0x245f