|
|
(4 intermediate revisions by the same user not shown) |
Line 1: |
Line 1: |
− | == VPP_VAGRANT_NICS disappear after "vagrant halt" or "vagrant reload" ==
| |
| | | |
− | More than likely if you've added a NIC via the above env variable, its ended up an orphan after a "vagrant reload".
| + | [[VPP/Troubleshooting/Vagrant|Issues with Vagrant]] |
| | | |
− | Sympton:
| + | [[VPP/Troubleshooting/BuildIssues | Build issues]] |
− | * "ip -o a" doesn't show any "ethx" type interfaces other than "eth0" mgmt
| + | |
− | * on VPP startup (assuming emacs gud-gdb) you see:
| + | |
− | EAL: PCI device 0000:00:03.0 on NUMA socket -1
| + | |
− | EAL: probe driver: 8086:100e rte_em_pmd
| + | |
− | EAL: Device is blacklisted, not initializing
| + | |
− | EAL: PCI device 0000:00:08.0 on NUMA socket -1
| + | |
− | EAL: probe driver: 8086:100e rte_em_pmd
| + | |
− | EAL: Not managed by a supported kernel driver, skipped
| + | |
− | | + | |
− | Fix:
| + | |
− | | + | |
− | * Don't Panic - there is no need to "reboot" or "vagrant reload --provision"
| + | |
− | * Do following:
| + | |
− | sudo su
| + | |
− | | + | |
− | root@localhost:~# lshw -C Network
| + | |
− | *-network:0
| + | |
− | description: Ethernet interface
| + | |
− | product: 82540EM Gigabit Ethernet Controller
| + | |
− | vendor: Intel Corporation
| + | |
− | physical id: 3
| + | |
− | bus info: pci@0000:00:03.0
| + | |
− | logical name: eth0
| + | |
− | version: 02
| + | |
− | serial: 08:00:27:b1:94:b1
| + | |
− | size: 1Gbit/s
| + | |
− | capacity: 1Gbit/s
| + | |
− | width: 32 bits
| + | |
− | clock: 66MHz
| + | |
− | capabilities: pm pcix bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
| + | |
− | configuration: autonegotiation=on broadcast=yes driver=e1000 driverversion=7.3.21-k8-NAPI duplex=full ip=10.0.2.15 latency=64 link=yes mingnt=255 multicast=yes port=twisted pair speed=1Gbit/s
| + | |
− | resources: irq:10 memory:f0000000-f001ffff ioport:d010(size=8)
| + | |
− | *-network:1 UNCLAIMED
| + | |
− | description: Ethernet controller
| + | |
− | product: 82540EM Gigabit Ethernet Controller
| + | |
− | vendor: Intel Corporation
| + | |
− | physical id: 8
| + | |
− | bus info: pci@0000:00:08.0
| + | |
− | version: 02
| + | |
− | width: 32 bits
| + | |
− | clock: 66MHz
| + | |
− | capabilities: pm pcix cap_list
| + | |
− | configuration: latency=64 mingnt=255
| + | |
− | resources: memory:f0820000-f083ffff ioport:d040(size=8)
| + | |
− | | + | |
− | | + | |
− | root@localhost:~# dpdk_nic_bind.py -s
| + | |
− | Network devices using DPDK-compatible driver
| + | |
− | ============================================
| + | |
− | <none>
| + | |
− |
| + | |
− | Network devices using kernel driver
| + | |
− | ===================================
| + | |
− | 0000:00:03.0 '82540EM Gigabit Ethernet Controller' if=eth0 drv=e1000 unused= *Active*
| + | |
− |
| + | |
− | Other network devices
| + | |
− | =====================
| + | |
− | 0000:00:08.0 '82540EM Gigabit Ethernet Controller' unused=
| + | |
− | | + | |
− | root@localhost:~# lsmod | grep igb_uio
| + | |
− | <nothing>
| + | |
− |
| + | |
− | root@localhost:~# modprobe igb_uio
| + | |
− | | + | |
− | If that doesn't work break out the sledgehammer:
| + | |
− | | + | |
− | root@localhost:~# find / -name igb_uio.ko
| + | |
− | /var/lib/dkms/vpp-dpdk-dkms/2.2.0/3.16.0-30-generic/x86_64/module/igb_uio.ko
| + | |
− | /lib/modules/3.16.0-30-generic/updates/dkms/igb_uio.ko
| + | |
− | root@localhost:~# insmod /var/lib/dkms/vpp-dpdk-dkms/2.2.0/3.16.0-30-generic/x86_64/module/igb_uio.ko
| + | |