VPP/QuickTrexSetup
From fd.io
Quick trex setup
- Ensure that the host can build vpp
- Clone trex source from gerrit.fd.io:
git clone https://gerrit.fd.io/r/trex
- Build trex; artifacts in .../scripts
cd linux_dpdk ./b configure (only once) ./b build
- Make sure that the igb_uio module is installed
# cd .../scripts # insmod ko/src/igb_uio.ko
- Use scripts/dpdk_nic_bind.py to bind interfaces to the igb_uio driver
- Create /etc/trex_cfg.yaml, edit the interface list / number of queues to match interfaces bound in the previous step
- version : 2 # version 2 of the configuration file interfaces : ["01:00.0","01:00.1"] port_limit : 2 # number of ports to use valid is 2,4,6,8,10,12
- Run the trex server
./t-rex-64 -i
- Run the trex console
./trex-console
Configure ports
- Set up ip4 source and dest addresses e.g. on two ports
trex>portattr -p 0 --ipv4 16.0.0.1 Applying attributes on port(s) [0]: [SUCCESS] trex>portattr -p 1 --ipv4 48.0.0.1 Applying attributes on port(s) [1]: [SUCCESS] trex>portattr -p 1 --dest 48.0.0.2 Applying attributes on port(s) [1]: [SUCCESS] Resolving destination on port(s) [1]: [SUCCESS] Port 1 - Recieved ARP reply from: 48.0.0.2, hw: 90:e2:ba:5a:9e:1d trex>portattr -p 0 --dest 16.0.0.2 Applying attributes on port(s) [0]: [SUCCESS] Resolving destination on port(s) [0]: [SUCCESS] Port 0 - Recieved ARP reply from: 16.0.0.2, hw: 90:e2:ba:5a:9e:1c
Run traffic
start -f stl/udp_1pkt_simple.py -m 4mpps
To watch port stats, use the "tui" command. Tui needs a large xterm. It will complain if the xterm isn't large enough.
trex> tui Global Statistics connection : localhost, Port 4501 total_tx_L2 : 4.62 Gb/sec version : v2.11 total_tx_L1 : 6.06 Gb/sec cpu_util. : 28.5% @ 1 cores (1 per port) total_rx : 4.62 Gb/sec rx_cpu_util. : 0.0% total_pps : 9.02 Mpkt/sec async_util. : 0.1% / 1.91 KB/sec drop_rate : 0.00 b/sec queue_full : 0 pkts Port Statistics port | 0 | 1 | total ---------------------------------------------------------------------- owner | root | root | link | UP | UP | state | TRANSMITTING | TRANSMITTING | speed | 10 Gb/s | 10 Gb/s | CPU util. | 28.5% | 28.5% | -- | | | Tx bps L2 | 2.31 Gbps | 2.31 Gbps | 4.62 Gbps Tx bps L1 | 3.03 Gbps | 3.03 Gbps | 6.06 Gbps Tx pps | 4.51 Mpps | 4.51 Mpps | 9.02 Mpps Line Util. | 30.32 % | 30.32 % | --- | | | Rx bps | 0.00 bps | 4.62 Gbps | 4.62 Gbps Rx pps | 0.00 pps | 9.02 Mpps | 9.02 Mpps ---- | | | opackets | 158312807 | 158312781 | 316625588 ipackets | 1 | 316531433 | 316531434 obytes | 10132019648 | 10132017984 | 20264037632 ibytes | 64 | 20258012096 | 20258012160 tx-bytes | 10.13 GB | 10.13 GB | 20.26 GB rx-bytes | 64 B | 20.26 GB | 20.26 GB tx-pkts | 158.31 Mpkts | 158.31 Mpkts | 316.63 Mpkts rx-pkts | 1 pkts | 316.53 Mpkts | 316.53 Mpkts ----- | | | oerrors | 0 | 0 | 0 ierrors | 0 | 0 | 0