ONE/BI and VAT Guide
From fd.io
< ONE
Contents
Introduction
The vpp contain a set of commands to set and debug LISP. One way to access the VAT (with proper permissions) is to use the vpp_api_test command:
sudo vpp_api_test
Binary API =
A Lisp API message is defined in the file .../vpp/vpp/api/vpp.api.
Lisp enable
The following is the VPP API message definition for enable/disable Lisp.
/** \brief enable or disable LISP feature
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param is_en - enable protocol if non-zero, else disable
*/
define lisp_enable_disable {
u32 client_index;
u32 context;
u8 is_en;
};
/** \brief Reply for lisp enable/disable
@param context - returned sender context, to match reply w/ request
@param retval - return code
*/
define lisp_enable_disable_reply {
u32 context;
i32 retval;
};
The following is the VPP API message definition for show Lisp status.
/** \brief Request for lisp-gpe protocol status
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
*/
define show_lisp_status{
u32 client_index;
u32 context;
};
/** \brief Status of lisp, enable or disable
@param context - sender context, to match reply w/ request
@param feature_status - lisp enable if non-zero, else disable
@param gpe_status - lisp enable if non-zero, else disable
*/
define show_lisp_status_reply{
u32 context;
i32 retval;
u8 feature_status;
u8 gpe_status;
};
Locator_set and Locator
The following is the VPP API message definition for creating and deleting Lisp locator_set and Lisp locator.
/** \brief add or delete locator_set
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param is_add - add address if non-zero, else delete
@param locator_set_name - locator name
@param locator_num - number of locators
@param locators - Lisp locator data
*/
define lisp_add_del_locator_set {
u32 client_index;
u32 context;
u8 is_add;
u8 locator_set_name[64];
u32 locator_num;
u8 locators[locator_num];
};
/** \brief Reply for locator_set add/del
@param context - returned sender context, to match reply w/ request
@param retval - return code
*/
define lisp_add_del_locator_set_reply {
u32 context;
i32 retval;
};
/** \brief add or delete locator for locator_set
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param is_add - add address if non-zero, else delete
@param locator_set_name - name of locator_set to add/del locator
@param sw_if_index - index of the interface
@param priority - priority of the lisp locator
@param weight - weight of the lisp locator
*/
define lisp_add_del_locator {
u32 client_index;
u32 context;
u8 is_add;
u8 locator_set_name[64];
u32 sw_if_index;
u8 priority;
u8 weight;
};
/** \brief Reply for locator add/del
@param context - returned sender context, to match reply w/ request
@param retval - return code
*/
define lisp_add_del_locator_reply {
u32 context;
i32 retval;
};
The following is the VPP API message definition for show locator_set and locator.
/** \brief Request for map lisp locator status
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param locator_set_index - index of locator_set
@param filter - filter type;
Support value:
0: all locator
1: local locator
2: remote locator
*/
define lisp_locator_dump {
u32 client_index;
u32 context;
u32 locator_set_index;
u8 filter;
};
/** \brief LISP locator_set status
@param local - if is set, then locator is local
@param locator_set_name - name of the locator_set
@param sw_if_index - sw_if_index of the locator
@param priority - locator priority
@param weight - locator weight
*/
define lisp_locator_details {
u32 context;
u8 local;
u32 sw_if_index;
u8 is_ipv6;
u8 ip_address[16];
u8 priority;
u8 weight;
};
/** \brief LISP locator_set status
@param locator_set_name - name of the locator_set
@param local - if is set, then locator_set is local
@param locator_count - number of locator this stats block includes
@param locator - locator data
*/
define lisp_locator_set_details {
u32 context;
u8 local;
u32 locator_set_index;
u8 locator_set_name[64];
};
/** \brief Request for locator_set summary status
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param filter - filter type;
Support value:
0: all locator_set
1: local locator_set
2: remote locator_set
*/
define lisp_locator_set_dump {
u32 client_index;
u32 context;
u8 filter;
};
Eid
The following is the VPP API message definition for creating and deleting Lisp eid address.
/** \brief add or delete lisp eid-table
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param is_add - add address if non-zero, else delete
@param is_ipv6 - if non-zero the address is ipv6, else ipv4
@param ip_address - array of address bytes
@param prefix_len - prefix len
@param locator_set_name - name of locator_set to add/del eid-table
@param vni - virtual network instance
*/
define lisp_add_del_local_eid {
u32 client_index;
u32 context;
u8 is_add;
u8 is_ipv6;
u8 ip_address[16];
u8 prefix_len;
u8 locator_set_name[64];
u32 vni;
};
/** \brief Reply for local_eid add/del
@param context - returned sender context, to match reply w/ request
@param retval - return code
*/
define lisp_add_del_local_eid_reply {
u32 context;
i32 retval;
};
The following is the VPP API message definition for show eid table.
/** \brief Dump lisp eid-table
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param locator_set_index - index of locator_set
@param is_local - local if non-zero, else remote
@param eid_type:
0 : ipv4
1 : ipv6
2 : mac
@param eid - EID can be ip4, ip6 or mac
@param prefix_len - prefix len
@param vni - virtual network instance
@param ttl - time to live
@param authoritative - authoritative
*/
define lisp_eid_table_details {
u32 context;
u32 locator_set_index;
u8 is_local;
u8 eid_type;
u32 vni;
u8 eid[16];
u8 eid_prefix_len;
u32 ttl;
u8 authoritative;
};
/** \brief Request for local eid table summary status
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param eid_set - if non-zero request info about specific mapping
@param vni - virtual network instance; valid only if eid_set != 0
@param prefix_length - prefix length if EID is IP address;
valid only if eid_set != 0
@param eid_type - EID type; valid only if eid_set != 0
Supported values:
0: EID is IPv4
1: EID is IPv6
2: EID is ethernet address
@param eid - endpoint identifier
@param filter - filter type;
Support values:
0: all eid
1: local eid
2: remote eid
*/
define lisp_eid_table_dump {
u32 client_index;
u32 context;
u8 eid_set;
u8 prefix_length;
u32 vni;
u8 eid_type;
u8 eid[16];
u8 filter;
};
Map resolver
The following is the VPP API message definition for creating and deleting map resolver ip address.
/** \brief add or delete map-resolver
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param is_add - add address if non-zero, else delete
@param is_ipv6 - if non-zero the address is ipv6, else ipv4
@param ip_address - array of address bytes
*/
define lisp_add_del_map_resolver {
u32 client_index;
u32 context;
u8 is_add;
u8 is_ipv6;
u8 ip_address[16];
};
/** \brief Reply for map_resolver add/del
@param context - returned sender context, to match reply w/ request
@param retval - return code
*/
define lisp_add_del_map_resolver_reply {
u32 context;
i32 retval;
};
The following is the VPP API message definition for show map resolver ip address.
/** \brief LISP map resolver status
@param locator_set_name - name of the locator_set
@param is_ipv6 - if non-zero the address is ipv6, else ipv4
@param ip_address - array of address bytes
*/
define lisp_map_resolver_details {
u32 context;
u8 is_ipv6;
u8 ip_address[16];
};
/** \brief Request for map resolver summary status
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
*/
define lisp_map_resolver_dump {
u32 client_index;
u32 context;
};
Remote Mapping
The following is the VPP API message definition for creating and deleting remote mapping.
/** \brief add or delete remote static mapping
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param is_add - add address if non-zero, else delete
@param vni - virtual network instance
@param action - negative map-reply action
@param eid_is_ip4 - ipv4/6 of source and destination EIDs
@param deid - destination EID
@param seid - source EID
@param rloc_num - number of remote locators
@param rlocs - remote locator data
*/
define lisp_add_del_remote_mapping {
u32 client_index;
u32 context;
u8 is_add;
u32 vni;
u8 action;
u8 eid_is_ip4;
u8 deid[16];
u8 seid[16];
u8 deid_len;
u8 seid_len;
u32 rloc_num;
u8 rlocs[0];
};
/** \brief Reply for lisp_add_del_remote_mapping
@param context - returned sender context, to match reply w/ request
@param retval - return code
*/
define lisp_add_del_remote_mapping_reply {
u32 context;
i32 retval;
};
Pitr
The following is the VPP API message definition for enable/disable pitr.
/** \brief configure or disable LISP PITR node
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param ls_name - locator set name
@param is_add - add locator set if non-zero, else disable pitr
*/
define lisp_pitr_set_locator_set {
u32 client_index;
u32 context;
u8 is_add;
u8 ls_name[64];
};
/** \brief Reply for lisp_pitr_set_locator_set
@param context - returned sender context, to match reply w/ request
@param retval - return code
*/
define lisp_pitr_set_locator_set_reply {
u32 context;
i32 retval;
};
Adjacency
The following is the VPP API message definition for creating and deleting adjacency.
/** \brief add or delete LISP adjacency adjacency
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param is_add - add address if non-zero, else delete
@param vni - virtual network instance
@param eid_type -
0 : ipv4
1 : ipv6
2 : mac
@param deid - destination EID
@param seid - source EID
*/
define lisp_add_del_adjacency {
u32 client_index;
u32 context;
u8 is_add;
u32 vni;
u8 eid_type;
u8 deid[16];
u8 seid[16];
u8 deid_len;
u8 seid_len;
};
/** \brief Reply for lisp_add_del_adjacency
@param context - returned sender context, to match reply w/ request
@param retval - return code
*/
define lisp_add_del_adjacency_reply {
u32 context;
i32 retval;
};
LISP commands
Lisp enable
To enable lisp, use "lisp_enable_disable":
vat# lisp_enable_disable enable
To disable lisp.
vat# lisp_enable_disable disable
To display lisp status
vat# show_lisp_status lisp status locator-set feature: enabled gpe: enabled
Locator_set
To add new locator_set, use "lisp_add_del_locator_set". This command also "reset" exist locator_set in vpp:
vat# lisp_add_del_locator_set locator-set ls1
To delete a specific locator_set, use "lisp_add_del_locator_set locator-set <name> del":
vat# lisp_add_del_locator_set locator-set ls1 del
When delete locator_set, then also delete all locator which are assigned to locator_set
To add new locator to locator_set, use "lisp_add_del_locator":
vat# lisp_add_del_locator locator-set ls1 iface GigabitEthernet0/a/0 p 1 w 2
Where p is priority and w is weight.
Locator API also support sw_if_index instead of interface name:
lisp_add_del_locator locator-set ls1 sw_if_index 6 p 1 w 2
To delete specific locator, use "lisp_add_del_locator locator-set <name> iface <interface> p <priority> w <weight> del"
vat# lisp_add_del_locator locator-set ls1 iface GigabitEthernet0/a/0 p 1 w 2 del
To display locator_set and locator:
vat# lisp_locator_set_dump
locator-set locator-set-inde locator priority weight
ls1 0 2 1 2
remote-1 1 6.0.3.20 1 1
Eid
To add new Eid address, use "lisp_add_del_local_eid"
vat# lisp_add_del_local_eid eid 6:0:1::0/64 locator-set ls1
There must exist locator_set, before add new eid address.
To delete specific eid address, use "isp_add_del_local_eid eid <address>/<prefix> locator-set <name>"
vat# lisp_add_del_local_eid eid 6:0:1::0/64 locator-set ls1 del
To display Eid table:
vat# lisp_eid_table_dump EID type locators ttl authoritative [0] 6.0.1.0/24 local(ls1) 2 0 0 [0] 6.0.2.0/24 remote 6.0.3.20 1440 1
Map resolver
To add new map resolver, use "lisp_add_del_map_resolver"
vat# lisp_add_del_map_resolver 6:0:3::100
To delete specific map resolver, use "lisp_add_del_map_resolver <ip address> del"
vat# lisp_add_del_map_resolver 6:0:3::100 del
To display map resolver:
vat# lisp_map_resolver_dump
Map resolver
6:0:3::100
Remote Mapping
To add new remote mapping, use "lisp_add_del_remote_mapping"
vat# lisp_add_del_remote_mapping add vni 0 deid 6.0.2.0/24 seid 6.0.1.0/24 rloc 6.0.3.2
To delete specific remote mapping, use "lisp_add_del_remote_mapping del vni <vni> deid <ip prefix> seid <ip prefix> rloc <ip address>"
lisp_add_del_remote_mapping del vni 0 deid 6.0.2.0/24 seid 6.0.1.0/24 rloc 6.0.3.2
To display remote mapping use:
vat# lisp_locator_set_dump
locator-set locator-set-inde locator priority weight
ls1 0 2 1 2
remote-1 1 6.0.3.20 1 1
Proxy-ITR
To add new proxy-itr, use "lisp_pitr_set_locator_set"
vat# lisp_pitr_set_locator_set 6:0:3::100
