Revision as of 11:40, 30 May 2018

DHCPv6

DHCPv6 IA_NA

To enable/disable DHCPv6 IA_NA client on an interface:

 dhcp6 client <interface> [disable]

Binary API:

 /** \brief Enable/disable DHCPv6 client on interface
     @param client_index - opaque cookie to identify the sender
     @param context - sender context, to match reply w/ request
     @param sw_if_index - interface to enable/disable client on
     @param enable - 1 to enable, 0 to disable
 */
 autoreply define dhcp6_client_enable_disable
 {
   u32 client_index;
   u32 context;
   u32 sw_if_index;
   u8 enable;
 };

DHCPv6 prefix delegation

To enable/disable DHCPv6 prefix delegation client on an interface:

 dhcp6 pd client <interface> [disable]

To show the state of clients and prefixes:

 show ip6 pd clients
 show ip6 prefixes

To add/delete IPv6 address potentially using available prefix from specified prefix group:

 set ip6 addresses <interface> [prefix group <n>] <address> [del]

Binary API:

 /** \brief Enable/disable DHCPv6 PD client on interface
     @param client_index - opaque cookie to identify the sender
     @param context - sender context, to match reply w/ request
     @param sw_if_index - interface to enable/disable client on
     @param enable - 1 to enable, 0 to disable
 */
 autoreply define dhcp6_pd_client_enable_disable
 {
   u32 client_index;
   u32 context;
   u32 sw_if_index;
   u8 enable;
 };
 
 /** \brief Add/delete IPv6 address optionally using available prefix
     @param client_index - opaque cookie to identify the sender
     @param context - sender context, to match reply w/ request
     @param sw_if_index - software interface index of interface
                          to add/delete address to/from
     @param prefix_group - prefix group,
                           ~0 means no prefix should be used
 */
 autoreply define control_plane_ip6_address_add_del
 {
   u32 client_index;
   u32 context;
   u32 sw_if_index;
   u32 prefix_group;
   u8 address[16];
   u8 prefix_length;
   u8 is_add;
 };

Binary API of data plane:

Enable DHCPv6 client subsystem to receive UDP messages containing DHCPv6 client port: (This is to set the router to DHCPv6 client mode - so client subsystem gets the messages instead of DHCPv6 proxy subsystem)

 /** \brief Enable/disable listening on DHCPv6 client port
     @param client_index - opaque cookie to identify the sender
     @param context - sender context, to match reply w/ request
 */
 autoreply define dhcp6_clients_enable_disable
 {
   u32 client_index;
   u32 context;
   u8 enable;
 };

Send DHCPv6 messages to server:

 /** \brief Struct representing DHCPv6 PD prefix
     @param prefix - prefix
     @param prefix_length - prefix length
     @param valid_time - valid lifetime
     @param preferred_time - preferred lifetime
 */
 typeonly define dhcp6_pd_prefix_info
 {
   u8 prefix[16];
   u8 prefix_length;
   u32 valid_time;
   u32 preferred_time;
 };
 
 /** \brief Send DHCPv6 PD client message of specified type
     @param client_index - opaque cookie to identify the sender
     @param context - sender context, to match reply w/ request
     @param sw_if_index - index of TX interface, also identifies IAID
     @param server_index - used to dentify DHCPv6 server,
                           unique for each DHCPv6 server on the link,
                           value obrtained from dhcp6_pd_reply_event API message,
                           use ~0 to send message to all DHCPv6 servers
     @param irt - initial retransmission time
     @param mrt - maximum retransmission time
     @param mrc - maximum retransmission count
     @param mrd - maximum retransmission duration
                          for sending the message
     @param stop - if non-zero then stop resending the message,
                   otherwise start sending the message
     @param msg_type - message type
     @param T1 - value of T1 in IA_PD option
     @param T2 - value of T2 in IA_PD option
     @param n_prefixes - number of addresses in IA_PD option
     @param prefixes - list of prefixes in IA_PD option
 */
 autoreply define dhcp6_pd_send_client_message
 {
   u32 client_index;
   u32 context;
   u32 sw_if_index;
   u32 server_index;
   u32 irt;
   u32 mrt;
   u32 mrc;
   u32 mrd;
   u8 stop;
   u8 msg_type;
   u32 T1;
   u32 T2;
   u32 n_prefixes;
   vl_api_dhcp6_pd_prefix_info_t prefixes[n_prefixes];
 };

Subscribe for notifications of DHCPv6 messages from server:

 /** \brief Register for DHCPv6 PD reply events
     @param client_index - opaque cookie to identify the sender
     @param context - sender context, to match reply w/ request
     @param enable_disable - 1 => register for events, 0 => cancel registration
     @param pid - sender's pid
 */
 autoreply define want_dhcp6_pd_reply_events
 {
   u32 client_index;
   u32 context;
   u8 enable_disable;
   u32 pid;
 };
 
 /** \brief Tell client about a DHCPv6 PD server reply event
     @param client_index - opaque cookie to identify the sender
     @param pid - client pid registered to receive notification
     @param sw_if_index - index of RX interface, also identifies IAID
     @param server_index - used to dentify DHCPv6 server,
                           unique for each DHCPv6 server on the link
     @param msg_type - message type
     @param T1 - value of T1 in IA_PD option
     @param T2 - value of T2 in IA_PD option
     @param status_code - value of status code
     @param preference - value of preference option in reply message
     @param n_prefixes - number of prefixes in IA_PD option
     @param prefixes - list of prefixes in IA_PD option
 */
 define dhcp6_pd_reply_event
 {
   u32 client_index;
   u32 pid;
   u32 sw_if_index;
   u32 server_index;
   u8 msg_type;
   u32 T1;
   u32 T2;
   u16 status_code;
   u8 preference;
   u32 n_prefixes;
   vl_api_dhcp6_pd_prefix_info_t prefixes[n_prefixes];
 };