VPP/DHCPv6
From fd.io
< VPP
Contents
DHCPv6
DHCPv6 IA_NA
Control Plane
To enable/disable DHCPv6 IA_NA client on an interface:
dhcp6 client <interface> [disable]
To show the state of clients and addresses:
show dhcp6 clients show dhcp6 addresses
Binary API:
/** \brief Enable/disable DHCPv6 client on interface
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param sw_if_index - interface to enable/disable client on
@param enable - 1 to enable, 0 to disable
*/
autoreply define dhcp6_client_enable_disable
{
u32 client_index;
u32 context;
u32 sw_if_index;
u8 enable;
};
Data Plane
Binary API:
Enable DHCPv6 client subsystem to receive UDP messages containing DHCPv6 client port: (This is to set the router to DHCPv6 client mode - so client subsystem gets the messages instead of DHCPv6 proxy subsystem)
/** \brief Enable/disable listening on DHCPv6 client port
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
*/
autoreply define dhcp6_clients_enable_disable
{
u32 client_index;
u32 context;
u8 enable;
};
Send DHCPv6 messages to server:
/** \brief Struct representing DHCPv6 address
@param address - address
@param valid_time - valid lifetime
@param preferred_time - preferred lifetime
*/
typeonly define dhcp6_address_info
{
u8 address[16];
u32 valid_time;
u32 preferred_time;
};
/** \brief Send DHCPv6 client message of specified type
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param sw_if_index - index of TX interface, also identifies IAID
@param server_index - used to dentify DHCPv6 server,
unique for each DHCPv6 server on the link,
value obrtained from dhcp6_reply_event API message,
use ~0 to send message to all DHCPv6 servers
@param irt - initial retransmission time
@param mrt - maximum retransmission time
@param mrc - maximum retransmission count
@param mrd - maximum retransmission duration
for sending the message
@param stop - if non-zero then stop resending the message,
otherwise start sending the message
@param msg_type - message type
@param T1 - value of T1 in IA_NA option
@param T2 - value of T2 in IA_NA option
@param n_addresses - number of addresses in IA_NA option
@param addresses - list of addresses in IA_NA option
*/
autoreply define dhcp6_send_client_message
{
u32 client_index;
u32 context;
u32 sw_if_index;
u32 server_index;
u32 irt;
u32 mrt;
u32 mrc;
u32 mrd;
u8 stop;
u8 msg_type;
u32 T1;
u32 T2;
u32 n_addresses;
vl_api_dhcp6_address_info_t addresses[n_addresses];
};
Subscribe for notifications of DHCPv6 messages from server:
/** \brief Register for DHCPv6 reply events
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param enable_disable - 1 => register for events, 0 => cancel registration
@param pid - sender's pid
*/
autoreply define want_dhcp6_reply_events
{
u32 client_index;
u32 context;
u8 enable_disable;
u32 pid;
};
/** \brief Tell client about a DHCPv6 server reply event
@param client_index - opaque cookie to identify the sender
@param pid - client pid registered to receive notification
@param sw_if_index - index of RX interface, also identifies IAID
@param server_index - used to dentify DHCPv6 server,
unique for each DHCPv6 server on the link
@param msg_type - message type
@param T1 - value of T1 in IA_NA option
@param T2 - value of T2 in IA_NA option
@param inner_status_code - value of status code inside IA_NA option
@param status_code - value of status code
@param preference - value of preference option in reply message
@param n_addresses - number of addresses in IA_NA option
@param addresses - list of addresses in IA_NA option
*/
define dhcp6_reply_event
{
u32 client_index;
u32 pid;
u32 sw_if_index;
u32 server_index;
u8 msg_type;
u32 T1;
u32 T2;
u16 inner_status_code;
u16 status_code;
u8 preference;
u32 n_addresses;
vl_api_dhcp6_address_info_t addresses[n_addresses];
};
DHCPv6 prefix delegation
Control Plane
To enable/disable DHCPv6 prefix delegation client on an interface:
dhcp6 pd client <interface> (prefix group <string> | disable)
To show the state of clients, prefixes and addresses:
show ip6 pd clients show ip6 prefixes show ip6 addresses
To add/delete IPv6 address potentially using available prefix from specified prefix group:
set ip6 address <interface> [prefix group <string>] <address> [del]
Binary API:
/** \brief Enable/disable DHCPv6 PD client on interface
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param sw_if_index - interface to enable/disable client on
@param prefix_group - name of prefix group (relevant when 'enable' is 1)
@param enable - 1 to enable, 0 to disable
*/
autoreply define dhcp6_pd_client_enable_disable
{
u32 client_index;
u32 context;
u32 sw_if_index;
u8 prefix_group[64];
u8 enable;
};
/** \brief Add/delete IPv6 address optionally using available prefix
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param sw_if_index - software interface index of interface
to add/delete address to/from
@param prefix_group - name of prefix group,
prefix_group[0] == '\0' means no prefix should be used
@param address - address or suffix to be used with a prefix
from selected group
@param prefix_length - subnet prefix for the address
@param is_add - 1 for add, 0 for remove
*/
autoreply define ip6_add_del_address_using_prefix
{
u32 client_index;
u32 context;
u32 sw_if_index;
u8 prefix_group[64];
u8 address[16];
u8 prefix_length;
u8 is_add;
};
Data Plane
Binary API:
Enable DHCPv6 client subsystem to receive UDP messages containing DHCPv6 client port: (This is to set the router to DHCPv6 client mode - so client subsystem gets the messages instead of DHCPv6 proxy subsystem)
/** \brief Enable/disable listening on DHCPv6 client port
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
*/
autoreply define dhcp6_clients_enable_disable
{
u32 client_index;
u32 context;
u8 enable;
};
Send DHCPv6 messages to server:
/** \brief Struct representing DHCPv6 PD prefix
@param prefix - prefix
@param prefix_length - prefix length
@param valid_time - valid lifetime
@param preferred_time - preferred lifetime
*/
typeonly define dhcp6_pd_prefix_info
{
u8 prefix[16];
u8 prefix_length;
u32 valid_time;
u32 preferred_time;
};
/** \brief Send DHCPv6 PD client message of specified type
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param sw_if_index - index of TX interface
@param server_index - used to dentify DHCPv6 server,
unique for each DHCPv6 server on the link,
value obrtained from dhcp6_pd_reply_event API message,
use ~0 to send message to all DHCPv6 servers
@param irt - initial retransmission time
@param mrt - maximum retransmission time
@param mrc - maximum retransmission count
@param mrd - maximum retransmission duration
for sending the message
@param stop - if non-zero then stop resending the message,
otherwise start sending the message
@param msg_type - message type
@param T1 - value of T1 in IA_PD option
@param T2 - value of T2 in IA_PD option
@param n_prefixes - number of addresses in IA_PD option
@param prefixes - list of prefixes in IA_PD option
*/
autoreply define dhcp6_pd_send_client_message
{
u32 client_index;
u32 context;
u32 sw_if_index;
u32 server_index;
u32 irt;
u32 mrt;
u32 mrc;
u32 mrd;
u8 stop;
u8 msg_type;
u32 T1;
u32 T2;
u32 n_prefixes;
vl_api_dhcp6_pd_prefix_info_t prefixes[n_prefixes];
};
Subscribe for notifications of DHCPv6 messages from server:
/** \brief Register for DHCPv6 PD reply events
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param enable_disable - 1 => register for events, 0 => cancel registration
@param pid - sender's pid
*/
autoreply define want_dhcp6_pd_reply_events
{
u32 client_index;
u32 context;
u8 enable_disable;
u32 pid;
};
/** \brief Tell client about a DHCPv6 PD server reply event
@param client_index - opaque cookie to identify the sender
@param pid - client pid registered to receive notification
@param sw_if_index - index of RX interface
@param server_index - used to dentify DHCPv6 server,
unique for each DHCPv6 server on the link
@param msg_type - message type
@param T1 - value of T1 in IA_PD option
@param T2 - value of T2 in IA_PD option
@param inner_status_code - value of status code inside IA_PD option
@param status_code - value of status code
@param preference - value of preference option in reply message
@param n_prefixes - number of prefixes in IA_PD option
@param prefixes - list of prefixes in IA_PD option
*/
define dhcp6_pd_reply_event
{
u32 client_index;
u32 pid;
u32 sw_if_index;
u32 server_index;
u8 msg_type;
u32 T1;
u32 T2;
u16 inner_status_code;
u16 status_code;
u8 preference;
u32 n_prefixes;
vl_api_dhcp6_pd_prefix_info_t prefixes[n_prefixes];
};
