Difference between revisions of "Honeycomb/Releases/1609/Setting Up Your Dev Environment"

Latest revision as of 12:24, 20 September 2016

Prerequisites

Building Honeycomb project requires:

Java 8
Maven (version 3.2.5 and above should be fine)
Properly set maven settings(displayed below) to access nexus.fd.io

Obtain the honeycomb source code

Make sure you have registered your ssh key with gerrit.

git clone ssh://[username]@gerrit.fd.io:29418/honeycomb
cd honeycomb
git checkout stable/1609

Building the code

Make sure all the prerequisites are installed.

To make sure fresh Honeycomb build is compatible with VPP, building VPP is also required to make sure the same JVpp version is used preventing out-of-sync exceptions. In case only Honeycomb needs to be built, skip Building VPP section.

Building VPP

Clone VPP according to: https://gerrit.fd.io/r/#/admin/projects/vpp and checkout to stable/1609 branch

Dive into VPP's build-root folder:

cd vpp/build-root/

Build VPP:

make distclean && ./bootstrap.sh && make V=0 PLATFORM=vpp TAG=vpp install-deb

Install VPP:

sudo dpkg -i *.deb

Start VPP:

sudo start vpp

Install JVpp into local maven repository to make Honeycomb pick up the same JVpp version

cd build-vpp-native/vpp-api/java/
mvn install:install-file -Dfile=jvpp-registry-16.09.jar -DgroupId=io.fd.vpp     -DartifactId=jvpp-registry -Dversion=16.09 -Dpackaging=jar
mvn install:install-file -Dfile=jvpp-core-16.09.jar -DgroupId=io.fd.vpp     -DartifactId=jvpp-core -Dversion=16.09 -Dpackaging=jar

Now current Vpp is up and running.

Building Honeycomb

Now Honeycomb can be built and it will use latest JVpp produced during VPP build.

Setup settings.xml

Put the following in your ~/.m2/settings.xml

<?xml version="1.0" encoding="UTF-8"?>
<!-- vi: set et smarttab sw=2 tabstop=2: -->
<settings xmlns="http://maven.apache.org/SETTINGS/1.0.0"
  xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
  xsi:schemaLocation="http://maven.apache.org/SETTINGS/1.0.0 http://maven.apache.org/xsd/settings-1.0.0.xsd">
 
  <profiles>
    <profile>
      <id>fd.io-release</id>
      <repositories>
        <repository>
          <id>fd.io-mirror</id>
          <name>fd.io-mirror</name>
          <url>https://nexus.fd.io/content/groups/public/</url>
          <releases>
            <enabled>true</enabled>
            <updatePolicy>never</updatePolicy>
          </releases>
          <snapshots>
            <enabled>false</enabled>
          </snapshots>
        </repository>
      </repositories>
      <pluginRepositories>
        <pluginRepository>
          <id>fd.io-mirror</id>
          <name>fd.io-mirror</name>
          <url>https://nexus.fd.io/content/repositories/public/</url>
          <releases>
            <enabled>true</enabled>
            <updatePolicy>never</updatePolicy>
          </releases>
          <snapshots>
            <enabled>false</enabled>
          </snapshots>
        </pluginRepository>
      </pluginRepositories>
    </profile>
 
    <profile>
      <id>fd.io-snapshots</id>
      <repositories>
        <repository>
          <id>fd.io-snapshot</id>
          <name>fd.io-snapshot</name>
          <url>https://nexus.fd.io/content/repositories/fd.io.snapshot/</url>
          <releases>
            <enabled>false</enabled>
          </releases>
          <snapshots>
            <enabled>true</enabled>
          </snapshots>
        </repository>
      </repositories>
      <pluginRepositories>
        <pluginRepository>
          <id>fd.io-snapshot</id>
          <name>fd.io-snapshot</name>
          <url>https://nexus.fd.io/content/repositories/fd.io.snapshot/</url>
          <releases>
            <enabled>false</enabled>
          </releases>
          <snapshots>
            <enabled>true</enabled>
          </snapshots>
        </pluginRepository>
      </pluginRepositories>
    </profile>
    <profile>
      <id>opendaylight-snapshots</id>
      <repositories>
        <repository>
          <id>opendaylight-snapshot</id>
          <name>opendaylight-snapshot</name>
          <url>https://nexus.opendaylight.org/content/repositories/opendaylight.snapshot/</url>
          <releases>
            <enabled>false</enabled>
          </releases>
          <snapshots>
            <enabled>true</enabled>
          </snapshots>
        </repository>
      </repositories>
      <pluginRepositories>
        <pluginRepository>
          <id>opendaylight-shapshot</id>
          <name>opendaylight-snapshot</name>
          <url>https://nexus.opendaylight.org/content/repositories/opendaylight.snapshot/</url>
          <releases>
            <enabled>false</enabled>
          </releases>
          <snapshots>
            <enabled>true</enabled>
          </snapshots>
        </pluginRepository>
      </pluginRepositories>
    </profile>
  </profiles>
 
  <activeProfiles>
    <activeProfile>fd.io-release</activeProfile>
    <activeProfile>fd.io-snapshots</activeProfile>
    <activeProfile>opendaylight-snapshots</activeProfile>
  </activeProfiles>
</settings>

Building Honeycomb

cd honeycomb/
mvn clean install

Now Honeycomb can be run with:

sudo sh vpp-integration/minimal-distribution/target/vpp-integration-distribution-1.16.9-SNAPSHOT-hc/vpp-integration-distribution-1.16.9-SNAPSHOT/honeycomb

Building packages

After the code has been built, you can build an RPM or DEB package for honeycomb.

RPM

Export build number variable:

 export BUILD_NUMBER=33

Run package building script from:

 packaging/rpm/rpmbuild.sh

DEB

Export build number variable:

 export BUILD_NUMBER=33

Run package building script from:

 packaging/deb/debuild.sh

@@ Line 12: / Line 12: @@
 <pre>
 git clone ssh://[username]@gerrit.fd.io:29418/honeycomb
+cd honeycomb
+git checkout stable/1609
 </pre>
@@ Line 23: / Line 25: @@
 === Building VPP ===
-Clone VPP according to: https://gerrit.fd.io/r/#/admin/projects/vpp
+Clone VPP according to: https://gerrit.fd.io/r/#/admin/projects/vpp and checkout to stable/1609 branch
 Dive into VPP's build-root folder:
@@ Line 48: / Line 50: @@
 <syntaxhighlight lang="bash">
 cd build-vpp-native/vpp-api/java/
-mvn install:install-file -Dfile=jvpp-registry-16.09.jar -DgroupId=io.fd.vpp     -DartifactId=jvpp-registry -Dversion=16.09-SNAPSHOT -Dpackaging=jar
+mvn install:install-file -Dfile=jvpp-registry-16.09.jar -DgroupId=io.fd.vpp     -DartifactId=jvpp-registry -Dversion=16.09 -Dpackaging=jar
-mvn install:install-file -Dfile=jvpp-core-16.09.jar -DgroupId=io.fd.vpp     -DartifactId=jvpp-core -Dversion=16.09-SNAPSHOT -Dpackaging=jar
+mvn install:install-file -Dfile=jvpp-core-16.09.jar -DgroupId=io.fd.vpp     -DartifactId=jvpp-core -Dversion=16.09 -Dpackaging=jar
 </syntaxhighlight>
@@ Line 59: / Line 61: @@
 ==== Setup settings.xml ====
-If you wish to build honeycomb outside of the provided vagrant environment.
 Put the following in your ~/.m2/settings.xml
@@ Line 181: / Line 181: @@
 Now Honeycomb can be run with:
 <syntaxhighlight lang="bash">
-sudo v3po/karaf/target/assembly/bin/karaf clean
+sudo sh vpp-integration/minimal-distribution/target/vpp-integration-distribution-1.16.9-SNAPSHOT-hc/vpp-integration-distribution-1.16.9-SNAPSHOT/honeycomb
 </syntaxhighlight>
-For further interactions with Honeycomb, refer to [[Honeycomb/Running Honeycomb]]
 == Building packages ==

Difference between revisions of "Honeycomb/Releases/1609/Setting Up Your Dev Environment"

Latest revision as of 12:24, 20 September 2016

Contents

Prerequisites

Obtain the honeycomb source code

Building the code

Building VPP

Building Honeycomb

Setup settings.xml

Building Honeycomb

Building packages

RPM

DEB

Navigation menu

Personal tools

Namespaces

Variants

Views

Actions

Search

Navigation

Tools